|
|
Product list:
AC7053 Cotton cords
AC7115 Large antique pendant
AC7107 Bead pack
AC7121 Antique spacers
AC7036 Bar and end piece
AC7028 Jump rings
AC7030 Assorted clasps
Equipment
Flat nose pliers – AC7025
Step by step
1. Cut a piece of cord to desired length
(Depends on how long you want your pendant)
2. Thread pendant onto centre of cord
3. Put both cord ends through a spacer then a bead then another spacer
4. Make a small knot on each side of the cord close to the top spacer; this will hold spacers and bead close to the pendant
5. Pop a cord end onto each end of the cord and close it around cord using flat nose pliers
6. Open a jump up with pliers and put through ring on cord end then close jump ring to secure
7. Repeat last step but with a clasp
Hints and tips
You can use knots as a focal point by placing them spaced out on your cord
You can also add more beads and spacers to this simple pendant to create a real style statement
If you really want to be fancy try attaching cord ends onto a length of chain
Or attach cord onto some sheer ribbon with knots and beads
<<< Back to Projects
|
